pushpole
01-17-2005, 10:32
Noticed my oil pressure reading failed high today. I did a search on the site and located the oil pressure sensor. I unplugged the connector and it was not connected to the wiring harness. The single brown/white wire was broken. Alright! and easy fix, just a little solder and heat shrink and life will be good. Not so fast there Mr. Goodwrench Apprentice, I can't find the wire harness that broke! Awww come on, the wire broke 1/2" from the plug! it's got to be hanging around nearby. I took the drivers side front wheel well cover off to get a good look at where the harness is......no luck. I've looked in the Service Manual but have not found a drawing of the harness location. Any help would be appreciated!