PDA

View Full Version : Weekend On The Edge was a blast!



Kennedy
09-13-2005, 07:19
First I'd like to thank the gang at Edge for putting on the event. They had nothing short of a small army of employees (some temps.) on hand at the events. This was no minor expense/event and near as I could tell, all company management right up to the CFO were on hand for the entire events as well! It was really nice to put faces with the people I've dealt with via telephone for some time now.

I'd also like to thank MP and Tough Guy (aka Big Gay Chris) along with all of the participating members/vendors for their misc contributions whether it was just showing up to support the event, cooking, or food/condiments etc. Denny (our fearless leader) always got us where we were going (eventually) even if it took an extra mile or two of driving to find our destination! :D


Brandon, Buck (Brandon's friend), Elaine and Myself spent the am Friday at Edge and got a private/personal "Presidential" tour by Edge President Tom Carlin himself while plant operations were still in process! We also got a brief ride in Tom's truck with the new A2 demo! Yes the unit DOES exist, and it's pretty sweet. There's a few details to iron out yet so we couldn't get a beta unit, but suffice to say it is pretty darn neat as a GPS (with audio) or as an Attitude controller. There is even a simple menu of vehicle types so that the unit is universal among "Juice compatible" vehicles regardless of brand or engine series.


Friday aft it decided to rain and hail slopping up our freshly washed trucks, but at least the hail didn't do any damage. The race track crew organization/track prep did not exactly do Edge any justice, but I am sure that Edge will lay down the law for next years event and make it even better. By the time we got in the gates, and unloaded the Tech lines were about 15 deep each so we had very limited test time to get dialed in. In hindsight, I should have left the LLY tied to the trailer and focused on the LB7 which was my main entry. My best ET was a 12.6 at 111+ and this was with a TCM that was pretty severely "shell shocked" by the instant addition of well over 250 RWHP via nitrous.


Saturday saw LONG lines of trucks waiting for the dynos. Many of the guys in the 400+ line were simply in the wrong line, but I'd guess they've never been humbled by the dyno before. What struck me was the number of trucks that just plain rolled smoke at idle and of course were left to run most all day in anticipation of their dyno run that was coming up in a few hours. :rolleyes: Myself, I left mine run most of the day too, but that is because I drained my batteries overnight and had to get jump started just to get in line for the event. Results will be posted in the not too distant future, but I witnessed Brandon run 650.8HP and 1328.5TQ, Motovet ran 479.5HP and 982TQ I ran 725.8HP and 1373.8TQ. MP's little red truck was at 509HP IIRC.

Sunday at the campground was also a decent turnout. Aaron and Cody from Edge stopped out for our vendor meet at the pavilion and we had a general BS-fest in the parking area afterwards with Greg Landuyt's, MP's, Brandon's and My trucks on hand as well as Edge's 2006 (stock) Dmax being available for test drive.


Over 3k miles logged for us including local driving to/from events etc. resulted in 10-11 mpg (unofficial estimate based on non metered aux tank) for the LLY pulling the trailer/truck most everywhere we went...

Jim Brzozowski
09-13-2005, 08:30
725.8 HP. John, if GM was selling your engine they would be calling it an 800 HP dmax, which is about what its turning out if on a chassis dyno. Are any of the reciprocating components of the engine non stock? You're putting out 3 times the stock HP, actually approaching the 2HP per cubic inch. That sir is impressive, sure hope I get to see everything you've described next year. Brandon must have have come close by in Texas on his way back home, I can still feel the excietment in the air around here.

More Power
09-13-2005, 11:25
Last year Dodge dominated the event (and Ford to a degree), as they have through the years and all around the country. It's worth noting that TDP member participation dramatically changed the complexion of the Edge event. This year, it was the Duramax. :D

Several magazines were represented in the media pool along with a videographer from the Outdoor channel. Expect to see a lot more in the months ahead. I'll post what I learn about publication/broadcast schedules as the dates firm up - in addition to TDP's own coverage.

Jim

BMDMAX
09-14-2005, 11:09
Here is a video of just one 1/4 pass and one dyno run. I have tons more to process but I figured this would be a good teaser:

www.bmdmax.com/downloads/wote-1.wmv (http://www.bmdmax.com/downloads/wote-1.wmv)

A couple of snapshots:
http://www.bmdmax.com/images/truckntrailer.jpg

http://www.bmdmax.com/images/spooling.jpg

Kennedy
09-14-2005, 14:16
I'm glad you guys got pics because I sure didn't...

More Power
09-15-2005, 08:15
Here's a clip from a web site, representing one of the videographers who attended the Edge event. I spoke with him during the dyno portion of the event, and was encouraged to tune in.


http://www.gunsandgears.tv/

Guns and Gears is an exciting new HIT television show on the Men's Channel and is shown nationally three times weekly on Dish Network (Channel 218) and local cable on every region of the United States. We currently reach 27,000,000 households and anticipate this number to dramatically increase in the near future.Weekly broadcast shedule:
Monday at 11:30 PM EST
Saturday at 7:00 and 9:30 PM EST
Sunday at 11:00 PM EST

I was told it may take 6-8 weeks before the Edge event and our trucks appear in the weekly lineup.

Should be fun! :D

Jim

Buck
09-15-2005, 08:24
Gunsandgears has been a huge support to the diesel guyz. They have had many segments of their show devoted to diesel performance. I can't wait to see you guyz on the show :cool: :cool: :cool:

BMDMAX
09-15-2005, 10:03
A few more photos:

http://www.bmdmax.com/images/edge.jpg
http://www.bmdmax.com/images/truckntrailer3.jpg

http://www.bmdmax.com/images/psd.jpg

http://www.bmdmax.com/images/sunset.jpg

http://www.bmdmax.com/images/kennedy.jpg

http://www.bmdmax.com/images/reddyno.jpg

Kennedy
09-15-2005, 10:25
CRAP! No Men's channel on DTV.

Hey Sdaver....

DmaxMaverick
09-15-2005, 10:29
Originally posted by kennedy:
CRAP! No Men's channel on DTV.

Hey Sdaver.... Ditto!

I'll have to get someone to record it for me.

motovet
09-15-2005, 19:43
Gotta find that pic of John's LLY rear tie down loop. :D

Kennedy
09-16-2005, 04:42
You know, that transmission stayed put right where it was for the most part. It migrated a little bit to the passengers side, but no problems. I coulda left that poor little loop alone...

motovet
09-16-2005, 09:47
Originally posted by kennedy:
You know, that transmission stayed put right where it was for the most part. It migrated a little bit to the passengers side, but no problems. I coulda left that poor little loop alone... I have to say that was just a bit funny at the time. When is the transplant taking place?

BMDMAX
09-16-2005, 12:58
It did make a funny little "ping" sound when subjected to dyno strap. :D

I guess it is time to break out the steel plate, some D-rings and the welder!

More Power
09-19-2005, 19:47
Edge's 2006 Chevy seen at the campground on Sunday. Can it really do smokey burnouts? ;)

http://www.thedieselpage.com/features/edgestruck.jpg

Jim

[ 10-12-2005, 12:21 PM: Message edited by: More Power ]

More Power
10-12-2005, 12:23
Here's a rough draft of the "Weekend" (http://www.thedieselpage.com/features/edgeweekend.htm) coverage. It might see some additional tinkering. :D

Jim

Craig M
10-12-2005, 14:58
Jim, Is there some missing dyno runs on dyno No 1. There was a Dodge late in the day that beat Kennedy in torque, but not in horsepower.

More Power
10-12-2005, 17:59
The dyno data was transcribed off the photos I took of the marker board. Must have missed one of the Dodges... :( It's been corrected. Thanks for the catch. :D

Jim

Kennedy
10-13-2005, 04:49
Edge is working on the dyno list also. They should have the "hard copy" results to go by...

drthv8r
10-14-2005, 08:53
It looks like somebody is wearing a Grand National shirt in one of the pictures. Good taste... smile.gif

BMDMAX
10-14-2005, 12:55
Originally posted by drthv8r:
It looks like somebody is wearing a Grand National shirt in one of the pictures. Good taste... smile.gif Good taste indeed! smile.gif The Duramax gets all the strip duty these days but I do take the GN for a 12 second pass now and again just so it can get some exercise. :D
http://www.bmdmax.com/images/GNandDmax.JPG

drthv8r
10-14-2005, 17:18
Originally posted by BMDMAX:Duramax gets all the strip duty these days but I do take the GN for a 12 second pass now and again just so it can get some exercise.Very nice I own 2 87 GNs and an 87 Turbo Regal we need to hook up sometime and chat.