PDA

View Full Version : Tires and Rims



Murray the Cop
04-02-2004, 07:46
I want to go bigger but tow a 5th wheel with a pin weight of 2000 dry. My truck is a 2500 and was told that the 265's would increase the weight capacity a few hundred pounds.I know all about the GVWR and fully loaded will be over by a few hundred pounds. Allready ordered the air bags, allthough the truck didn't drop under level when I picked up the unit. I was thinking more along the lines of the 285's.I would switch the rims,if I had too,because of the weight(6 to 8 wide). Any opinions on tires and or rims?

NETMINDER
04-02-2004, 10:22
Running 265 Bridgestone Revo's no problem - Looks great. I think I read with 285's there might be some rubbing.

DmaxMaverick
04-02-2004, 11:00
I have 285/75/16's on Centerline 16 X 8's and frequently put 2000 #'s pin weight on it. Tows great. The 285 D's have a weight rating 300 #'s each over the OEM 245's. The 265 E's give you 100 #'s each more than that. I've been running this combination for 3 years.
Truck photo's here (http://community.webshots.com/album/88982014KqemjB)

About the rubbing. No problem with very slight modification. Had to heat up (with heat gun) the fender liners and reshape them where they did rub slightly. The material is easily influenced by a little heat and retain the shape you choose. The E-Brake cable behind the left front wheel had to be tied back, but no change in function. I removed the front air dam, but it may or may not rub, and if so, can be trimmed. The torsion bars were turned up a couple turns to level the truck with trailer in tow. I also have a Mega filter installed in JK's location and no rubbing there.

Going to the larger tires/wheels was probably the most asthetic/functional upgrade I've done to the truck. It rides much smoother and allows me to run at lower tire pressures for the same weight capacity. Not to mention it just looks like a truck should. Mileage, both loaded and empty, increased slightly, all else being equal. Dropped about 200 RPM at 75 MPH, which is about 1925 RPM. All references to mileage/speed are corrected. I use a Predator to correct for the wheel size change.

Either the 265 or 285 tire will significantly increase the tire capacity, and piece of mind.

Murray the Cop
04-02-2004, 17:26
Is there a 285 that is E rated?

ore.diesel
04-02-2004, 18:47
MURRAY THE COP
I WOULD BE INTERESTED IN YOUR WHEELS IF YOU HAVE THE POLISHED ALUM. AND THINK ABOUT GETTING RID OF THEM. KEEP ME IN MIND. OKAY, THANX, JESS

Russ Denman
04-02-2004, 22:31
Michellin LTX M/S LT265/75R16E is rated at 3415 lbs per tire while their LT245/75R16E is rated at 3042 per tire. I could not find a reference for the OEM Steeltex weight rating but I believe the Michellin 265 will give you about 400#s per tire more than the OEM. You can get this tire at the warehouse clubs for a good price. I had the LTX A/T on a previous suburban, it looks more aggressive but the M/S has better wet and snow traction (more siping). The following URL is their specs for this tire. smile.gif

http://michelinman.com/assets/pdfs/doc_ltxms.pdf

Topic moved to the 2500HD/3500 HD Trucks & Drivetrain forum (http://forum.thedieselpage.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=7;t=005759) smile.gif

[ 04-03-2004, 04:43 AM: Message edited by: jbplock ]