PDA

View Full Version : 2002 high idle info for tomorrow morning


bearman
02-28-2002, 22:55
Getting high idle installed tomorrow morning. I here it is different than 2001. If anybody has instructions on this PLEASE e-mail me @ bearengy@telusplanet.net :confused: :confused: . By the way, my new 02 dually rocks way better than my 01 did :D :D :D :cool:
Cheers
Bear
Kennedy
02-28-2002, 23:00
Same but different. Same pin/connection etc, just no standby speed unless programmed in, and IF you program, it will run funky and oscillate between balancing and not on the fuel injection map.
DSLPOWR
02-28-2002, 23:08
Good to hear you like the 02!!! We finally got another happy camper here. :D Anyway check your mail, I sent you a copy. Kennedy is right, installation wise there is no difference between a 2001 or a 2002, you just loose the 850 standby speed.
bearman
02-28-2002, 23:15
Thanks guys, that prety awsome, 2 replys in 13 minutes :cool: :cool:
Cheers
Bear
DSLPOWR
02-28-2002, 23:22
Anytime brutha!
http://216.40.201.155/s/contrib/sarge/SierraC3.gif
SGJ
03-01-2002, 18:27
DSLPOWR ,
Could you please e-mail me the same info for high idle in 2002's . My e-mail is sdilliot@ciaccess.com . Thank's in advance ! :cool:
DSLPOWR
03-01-2002, 19:47
Sent. :D
kerry witherspoon
03-01-2002, 19:54
Would also like high idle information for my 2002 .my e mail kwitherspoon@shaw.ca. Also bearman you from alberta im from calgary new 2002 3 days love it. ;)
SGJ
03-01-2002, 20:07
Thanks DSLPOWR , appreciate you sending it so fast.
DSLPOWR
03-01-2002, 20:38
kerri- sent!
Texasoilman44
03-02-2002, 05:58
DSLPOWR,

Could I trouble you to send me the high idle info for the 2002? Thanks a million. My email is mcbridks@bp.com.

Best Regards,

Kevin
DSLPOWR
03-02-2002, 11:15
Sent.
redmax
03-02-2002, 15:56
DSLPOWR,
Would you mind sending the High Idle info for the 2002 Duramax one more time? n5hty@centurytel.net
Thanks,
redmax
DSLPOWR
03-02-2002, 17:24
Sent. Anyone else?
DieselDo'er
03-03-2002, 00:50
Hello DSLPOWR
I would also be interested in the this for the 01 Dmax. My e-mail is justlabs@nowonline.net
Thanks in advance
Brian
DSLPOWR
03-03-2002, 01:52
Sent.
nate7161
03-03-2002, 06:32
DSLPOWR, Since you mentioned it I wouldn't mine getting that info. My email is nate7161@yahoo.com

Thanks alot
DSLPOWR
03-03-2002, 15:54
Sent.
MGM
03-05-2002, 12:59
DSLPOWR

Me to please. mikem@celgar.com
DSLPOWR
03-05-2002, 13:05
Sent.
Cobra-R
03-05-2002, 13:32
Hate to bug you, but could you send it to me also?

Thanks, Brian

www.grothimp@cannon.net
DSLPOWR
03-05-2002, 13:38
Sent. Anyone else? LOL :D

[ 03-05-2002: Message edited by: DSLPOWR ]</p>
Firemax
03-05-2002, 17:52
DSLPOWER,

If it's not to much of a hassle one more time.
jlrhammer@yahoo.com
Forced Induction
03-05-2002, 18:32
One more here please, forced355@aol.com
Thanks alot, I know you've been sending them left and right!!

Thanks Again!
Tommy turbo
03-05-2002, 18:44
Can you handle one more for a 2001? Thanks TFra240380@aol.com
bearman
03-05-2002, 20:16
I,m thinkin I created a monster :D :D
Cheers
Bear
tonkater
03-05-2002, 22:03
Could someone explain what this "hi idle" is and why guys want it ?
I got an 85 6.2 and 88 6.2 and is this the same as "fast idle" when cold ?
(03 dmax in ordering stage)Thanks !!
MYDMAX
03-05-2002, 22:06
DSLPOWR
One more time please.
Thanks Adi
v6toys@attbi.com
bearman
03-05-2002, 22:55
tonkater
Ya, it's the same deal
Cheers
Bear
Calgary
03-05-2002, 23:05
DSLPOWR ,
Could you please e-mail me the same info for high idle in 2002's . My e-mail is aschenbrenner@shaw.ca . Thanx!
DSLPOWR
03-06-2002, 00:11
Sent you all a copy. The high idle mod is simply added into the ecm as a idel up to run a pto. It's supposed to make the hydraulics faster. What some of us use it as is to make the truck warm up faster when it's really cold out (or cool the a/c for that matter), and idel the truck up to prevent wash-down of the cylinder walls. I am sure there are tons of reasons but they best is, "hey, look what I added to my truck".....
BobW
03-07-2002, 00:29
From reading the posts I'm not sure if the high-idle requires some sort of mod kit or simply redoes some of the existing circuitry. DslPower, I'd be interested in the mod info for the 2002. I drive down the mountain each morning and engine temp stays less than 110o for my first 10 miles of driving.

Thanks in advance.

email address: bwilson@sbccd.cc.ca.us
LaskinRdmax
03-07-2002, 07:24
DSLPOWER

Guess I'll throw my hat in the ring too. TIA
bschumell@myexcel.com

Bill
odoh
03-07-2002, 14:37
Gosh ~ Being a newbie w/a DMax on the way and you've been so accommodating. I wonder if it would be too much to post me a copy also? odoh1@hotmail.com

Thanks
odoh
DSLPOWR
03-07-2002, 22:39
Sent.
LaskinRdmax
03-08-2002, 12:23
DSLPOWER-Got your email; I appreciate it, thanks!!
James S
03-08-2002, 15:45
Hey Folks,

New to the group. I do not have a Duramax, but I just thought I would share an idea or two. The actual reason for getting the high idal, is for when it is cold out. In the cold, diesel can jell, and the carbon can separate from the diesel. When that burns, that creates TONS of black smoke. This might be another reason why some of you are writing in about having problems with black smoke. It does not damage the engine, but is not vary pleasant, both because of the black smoke and the odor, associated with the burning carbon. As some of you have already stated, it also does warm the engine up faster, thus heat the cab faster, and air condition it faster as well.
alamovet
03-10-2002, 19:12
Do you get the high idle mod for the 2001 through GM or someone else.

Can you set it up to high idle all the time...at stop lights, etc.?

Thanks
alamovet@yahoo.com
DSLPOWR
03-10-2002, 20:19
It isn't some kit that you actually buy, but you can have your dealer install it for you. You simply need to have a switch and a GM micro pak terminal that plugs into the EMC. Provide power to this and she will idle up. It will only idle when set and the truck has to be in park if it's an automatic or if its a manual the brake has to be set, if you would like I can send you a copy of the instructions if you provide me with your E mail address.
DSLPOWR
03-10-2002, 20:21
Duh, I didn't see you had included that in your post...........I sent you a copy.

[ 03-10-2002: Message edited by: DSLPOWR ]</p>
nono50
03-10-2002, 21:39
Dslpowr can you pls send me the high idle instructions for a 2002 duramax.My e-mail is nono50@visi.net.Thanks
DSLPOWR
03-11-2002, 00:55
Sent. :cool:
tbrowne
03-11-2002, 14:54
DSLPOWR, can I get a copy too? These posts have grabbed my interest. wtbrowne@ameritech.net.
Thanks!
AOPA Roger
03-13-2002, 10:48
DSLPOWR, Before you quit sending these out, can you send me a copy? Thanks Roger rcarey@nupoint.net
dmaxster
03-13-2002, 17:11
Hey DSL how about just posting it on here so you don't have to keep sending.....Just a thought...dmaxster :cool:
DAS Man
03-16-2002, 21:46
DSLPOWR, could I please get a copy also? Thanks in advance. chad_ivan@hotmail.com
SMOKIN DEEZUL
09-24-2002, 13:25
Some one send me the DESTRUCTIONS! my 02 I am trying to do all of the cheap Mods before I go crazy.. ampmaster99@yahoo.com

THanks,

Greg
AKDmax
09-24-2002, 13:37
Read this post: http://forum.62-65-dieselpage.com/ubb/ultimatebb.php?ubb=get_topic&f=3&t=002567

And this one: http://forum.62-65-dieselpage.com/ubb/ultimatebb.php?ubb=get_topic&f=3&t=004131

If that doesn't work for you, you can use the search function and find oodles of info. Have fun!
dschroeder
09-24-2002, 14:32
DSLPOWR,

If you wouldn't mind, could you please send me a copy of the instructions. I will have my truck in this week at the dealer anyway. Maybe something they can do while it's there. Thanks!

dschroeder@grobsystems.com
ryeguy
09-24-2002, 15:01
Yeah, me too please. rbryce@ramsoft.bc.ca '02 D/A.

--Rob
GMC-2002-Dmax
09-24-2002, 15:08
I know it was posted befor, I am lazy today, send it to me too , PLEASE :D

Thanks in advance, ;)

GMC
AKDmax
09-24-2002, 15:33
from SMOKIN DEEZUL to GMC-2002-Dmax. You have mail! Gotch ya covered DSLpower...
JustWondering
09-24-2002, 17:03
JustWondering...can someone email me the instructions please, if it's not to late to jump on board...scalp2@hotmail.com
Thanks-a-bunch
Carli_max
09-26-2002, 06:42
Dslpowr can you pls send me the high idle instructions for a 2002 duramax. My e-mail is carmen.b.filletti@lmco.com. Thanks
jhanratt
03-26-2003, 18:43
Can someone please post the location of the terminal used to enable the high idle circuit. What colour or location or how do I find it. It sounds to me like you just apply 12V+ to enable it. I have an 03.

Thanks for your assistance

Jeff.
GM Smitty
03-26-2003, 19:55
Jeff - Position C1-71.
Go to kennedydiesel.com - select "Tech Tips" - select "Duramax Tips" - then "Fast Idle Installation"
Great instructions!
Josh
drgracr
03-26-2003, 20:18
Just finished hooking up high idle on my '02
had to adjust the 6000+ rmp glitch before initial try. My truck has standby speed, I thought it was only avaliable on '01? :confused:
suprised thats all
roegs
04-01-2003, 14:10
Are the instructions that DSLPOWR was sending out the same as those on JK's site? I'd like to add this to my '03 and don't want to bother DSLPOWR if the instructions are the same.
DMAXED
04-01-2003, 19:04
Has anyone hooked up the high idle to the aux light switch ?
Brandenburg
04-01-2003, 19:18
DMAXED, I have, I think others have as well. Works great! smile.gif
Johnson
04-04-2003, 08:51
DSLPOWER
Could I get a copy of the high Idle, also thanks
Duninit@yahoo.com
DmaxCC6spd
04-04-2003, 10:14
Me too! Me too! Could someone email a copy of the instructions to skaats@itgltd.com.

Thanks and thanks to Dslpowr for his help.

[ 04-04-2003: Message edited by: DmaxCC6spd ]</p>