Parker needle valve

[Bulldogger]

To SS396 or anyone else who used this valve for the lift pump what was the part number :D and the type and size ends you used. Thanks Dave

[SS396]

Bulldogger,

I am going by memory here, but I believe it is N-600-S. This needle valve uses 3/8 pipe and has pretty good flow. This valve had female threads, both ends. I used a 1/4-3/8 pipe elbow from the FM100 pump.

I could never find the valve on Parker's website, but the dealer had bins full, they must sell a lot of these needle valves.

The 1/4 pipe version is N-400-S, but is looks to be too small.

Hope this helps, good luck.

Pat.