PDA

View Full Version : Can you send the regular juice to edge to get the programming of the hot juice?


jfile
11-28-2002, 10:29
Can you send the regular juice to edge to get the programming of the hot juice?
toophless
11-28-2002, 10:49
Yup, that's how it's done.
If you bought it from a distributor, you might be able to send it there too.
RichBailey
11-28-2002, 14:31
If you bought yours from JK, you might want to call him. I believe he can reprogram the boxes and was running a special a while back.
DMAXDiva
11-29-2002, 09:11
Hi jfile:

I started out with v3.2, then upgraded to v3.61, and have now had v4.61 Hot for about a month now. I originally purchased the unit from Diesel Injection Services in Lubbock back in June, but have shipped the unit directly to Edge for each upgrade. As others have attested, the company is top-notch to deal with, and I have no complaints whatsoever with the product...whatta RUSH! :D
Kennedy
11-29-2002, 10:40
I've had a few people get confused here, so here goes:

1) Programming UPDATES (revisions etc) within the module series (STD or HOT series) are done at no charge.

2)Programming UPGRADES (from STD to HOT) are charged a fee.

3) Any Juice module can be changed to any program. There ARE some pre 4.30 boxes (based on when the box was originally built) that do not work with 2003 trucks and need a hardware update (again free) to basically make the oil psi gauge function properly.