PDA

View Full Version : 4X4 light cluster



Murray the Cop
02-22-2004, 06:19
The lights on the push buttons for the 4 wheel drive flash every once in awhile. Last time I brought it to the dealer it was for codes p0380 and p0540 but they also found c0055 and a b1440 codes. The first two were solved with a maxi fuse. The second two were supposedly solved by "removed right side knee bolster to gain access to BCM. Found pin c on c1 has a poor connection,repaired conection cleared DTC's and rechecked." Can anybody tell me where this conection is and if it sounds like it really is the problem? Its getting to be a pain in the @$$ to remove everything every time it goes in to the dealer. Thanks

jbplock
02-22-2004, 16:25
Murray,
Do you also get the "Service 4WD" message in the DIC when the 4x4 lights flash? That's what mine was doing but since the dealer replaced the encoder motor, all is well.
smile.gif