View Full Version : how to work this thing?
Joe Duffiney
10-29-2004, 14:15
I have a predator and would like to check balance rates. Do I hook it up first with ign. on and engine not running or hook it up while it is running ?
WanaDmxsub
10-29-2004, 17:57
Hook it up first, then start the engine
Joe Duffiney
10-30-2004, 09:37
Thanks for the reply. I checked and all look good but one still within spec though. I guess I will keep an eye on them.
mark45678
10-30-2004, 20:35
+ or - 4 in park
+ or - 6 in drive
all a idle with motor warm
the closer to 0 the better anything over x.x your starting to have a problem.... get some injector cleaner and try it again in a week.
Joe Duffiney
10-31-2004, 04:37
Thanks Mark. The fuel temp. was at 86 degrees when checking . I'm not sure where coolant temp was at the time. I let it run long enough to where the wait to start light didn't come on when I turned on ign. I will check again today after driving to full operating temp.
WanaDmxsub
10-31-2004, 21:09
I've got 1 that's at -5.xx and another that's at +5.xx. They've been like that for months.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.