hydraulic-vs-manual clutch

[aloharovers]

I have a older GMC SM465 that came out of a truck with manual linkage.
My Rover is all hydraulic. I rigged up something that sortof works, but need to do it right.
I have found out that the bell housing is different, but what about the clutch fork, pivot ball, clutch disc, throw out, and pressure plate.
I need to figure out exactly what I need for parts.

Thanks
Pete

[azblazor]

Check with advance adapters. They have a lot of info on hydraulic clutch conversions. I think the fork may be a different length between the mechancial and hydraulic clutches. Of course the bell housing which you mentioned, is different.