Snap on MT 480?

[Dezman125]

Hi all
I have in my possesion a new to me MT 480. With it i recived a MT 88A probe? But unfortantly their were no instructions for use. This is the first time i have seen one of these meters,let alone use one. :confused:
My question is does anyone have a spare instruction or owners manual?
Is the MT 88a probe the right one for my 6.2?
Any other info or tips on use would be greatly apreciated.
Thanks

[Dieselboy]

The MT88a is the magnetic pickup that reads the indentation off the harmonic balancer. It should be the right one for your 480. The luminosity probe that goes in the #3 glow plug hole is the MT161, and that's still a good Snap-On part number. Although it's $200 new, it's still available.

Here's my meter pictures:
http://www.oliverdiesel.com/images/mt480/

[Dezman125]

Diesel Boy,Thanks for the info and pic's.

I guess i'll have to add a MT 161 to my list of needed items.
Anyone have a spare one for sale?

Thanks

[britannic]

The MT160 works just fine in the 6.2L as well...


Originally posted by Yukon 6.2:
Diesel Boy,Thanks for the info and pic's.

I guess i'll have to add a MT 161 to my list of needed items.
Anyone have a spare one for sale?

Thanks

[Dieselboy]

Which reminds me:
Before I knew which probe to use, I priced both the MT160 and MT161. The MT160 turned out to be about $15 cheaper compared to the MT161. Both are still good part numbers with Snap-On.

[porboyz]

My question is does anyone have a spare instruction or owners manual?

If you still need, post your email address

[porboyz]

My question is does anyone have a spare instruction or owners manual?

If you still need, post your email address

[Dezman125]

Porboyz
My e-mail is salecker@yknet.yk.ca
Thanks