PDA

View Full Version : Tiny Tach



6.2L Driver
10-11-2004, 08:27
Has anyone installed one of theses tiny tachs? Also can someone tell me the size of the injection line on the 6.2 diesel so i know what size transducer to get.

Jgreemo
10-12-2004, 19:41
I'm not sure what tach you are interested in, but I put an Isspro 2 1/16 in. 4000 rpm electronic model in my Sub. You have to purchase separately the sending unit, and for this one it's a small transducer and two little magnets which glue 180 degrees apart onto the harmonic balancer. The transducer mounts to one of the pan bolts.

I mounted the tach just to the left of center on the steering column and put it into one of Isspro's tach mounts (also sold separately). Looks good and it took all of 90 minutes to wire everything up.

Jon

6.2L Driver
10-13-2004, 18:56
I was talking about this one on tinytach.com check it out does anyone have one of these

Subzilla
10-14-2004, 04:15
See previous post dated 4-24-04 "tiny tach" in 6.2 forum.

6.2L Driver
10-18-2004, 15:25
How do i find that post

Hye
10-18-2004, 15:39
Find the tiny "search" link at the top right part of this page. Put in "tiny tach" without the quotes.

And the O.D. of the injector lines is .250".

[ 10-18-2004, 07:07 PM: Message edited by: Hye ]

andyritter
10-30-2004, 07:47
I'm very pleased with my tiny tach but wish I had known a lighted version was available.
Andy