PDA

View Full Version : Fueling


humding
07-27-2005, 13:29
I'm sure it has been asked 100 times before but I can't seem to find the answer using the search facility. My annual government test is coming up soon and I just want to know how the ip fuelling can be turned down if I need to, to get it to pass the emissions test if required.Normal driving it is not smokey but on anything but the lightest acceleration I have a fair bit of smoke. BTW it is an Avant customised 6.2 NA.
Daan
07-28-2005, 05:35
Check out this thread:

http://forum.thedieselpage.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=003766

Good luck!
humding
07-28-2005, 13:40
Cheers, I knew it had to be there somewhere
humding
08-07-2005, 12:51
I take it that I need a new gasket when replacing the cover. Is this the same on 6 cyl Stanadyne pumps (ie John Deere tractors)If it is the same I can get them handy enough here, otherwise I'll have to get shipped in from the US
BobND
08-07-2005, 20:01
The Deere seal ring will fit.