Anyone have a body lift in their truck?

[whatnot]

If so, does the engine coolant get hot?

[fogg65td]

I just recently put a 3 inch body lift in my truck. Didn't have any overheating probs in the past. Haven't drivin my truck much since and now it is gettin painted. I was goin to go with and electric fan setup, but im not sure yet. I talked with a guy who had a body lift in his truck but modified the shroud and never had any problems. Ill have more information in a few weeks and will be hapy to share.

[whatnot]

If you could get pictures of the shroud I would appreciate it.
My truck just has 3" spacers between the 2 shroud pieces. It gets hot pulling a load on the hills. With the engine idling and the hood open, all the air blows staight up. (I think it is just making a loop around the fan) I put my hand back above the engine and don't feel any wind.
The only thing I thought of to try so far is to cut a piece of plywood the shape of the shroud that is screwed on to close up the gap.

If anyone else has any suggestions, please post them.

[fogg65td]

I haven't got my setup complete since my truck is apart and prob will be for a few weeks. I think a better setup would be to cut the upper shroud and lower it so it was more centralized around the fan, if that makes sense. One thing about my truck is i have a cowl induction hood which really lowers underhood temps. Once i get up and running id be happy to help u out.