exhaust adapters??

[yeti]

Where or how can I get the exhaust adapters used by Dr. Lee?
I got new exhaust to do and would like to upsize it.
http://www.thedieselpage.com/reviews/avanteng20.jpg

[ 09-09-2004, 08:14 AM: Message edited by: yeti ]

[ropinfool]

if you email him, he will email you the plans, take them down to the machine shop and you are done. John

[JeepSJ]

I really wish that I had a set of those made before I did my exhaust. If you look at the pics I posted last month, you can see where they had to go down to a 2 1/4" pipe on the crossover where it goes into the drivers side exhaust manifold.

I heard that the 6.5 manifold flows better than the 6.2, and the flange is larger so you can run a 2.5" pipe. Hey, I had to leave something for a future upgrade project.

What does this have to do with the original post? Nothin really...

[arveetek]

The good Doc emailed me the specs, I took them to the machine shop who made 'em for me, and then I installed the adapters. Worked great, allowing me to bolt up 2.5" pipes directly to the manifolds.

When I installed my turbo, I didn't need them anymore, so I sold them to another DP member.

Casey

[CleviteKid]

Yeti:

send me an email leeswanger "at" yahoo "dot" com


Dr. Lee :cool: