CDR valve part number??

[mdregister]

Is this the correct part number for the CDR valve for my 85 6.2L?

25042462

[Dieselboy]

Your CDV should be the CV870 with the port that leads to the oil fill tube, and splits to the ait intake.

[mdregister]

Thanks!

[wthif]

Ok thought I would dredge up an old post because I'm having a little trouble.

The Britannic Special has a CDR with CV871 on it.

My old engine had a CDR with CV870 on it

Which is correct for a Banks setup?

The quicker you guys could get back the better. :D Thanks

[Dieselboy]

If they're shaped the same, I doubt it matters which one. I ran the CV870 with a turbo for quite some time before switching to the late style right valve cover and using the turbo CDR.

[britannic]

It doesn't matter, if the CDR is in working condition, either style will suffice..

[gphudgins]

Originally posted by Dieselboy:
If they're shaped the same, I doubt it matters which one. I ran the CV870 with a turbo for quite some time before switching to the late style right valve cover and using the turbo CDR.

[gphudgins]

Originally posted by Dieselboy:
If they're shaped the same, I doubt it matters which one. I ran the CV870 with a turbo for quite some time before switching to the late style right valve cover and using the turbo CDR. what number is the turbo CDR?

[Dieselboy]

Originally posted by john8662:
I haven't "tested" my CDR valve on my 1995 6.5 Turdbo Diesel yet, but due to loss of oil and and lots of oil seeping from the upper intake and found before turbo intake I am considering R&Ring this item. I already have a CDR valve brand new that was a take off from a non turbo 6.5 setup, I got it with the intake. I was comparing part numbers on the two and they are different. I was wondering if there really is a difference in the CDR valve used on a turbo model verses a non turbo model? Here are the part numbers:

Non Turbo - 25097696
Turbo - 25098666 John8662's orginal post:
http://forum.thedieselpage.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=007623#000002