won't start

[alberta]

94 6.5LTD turns over well but shows no sign of starting.It had a problem of stalling until 3 weeks ago when I installed a fuel injection module.It has ran flawlessly since.I had previosely installed a fuel pump and a wastegate solenoid.help!Also how do you loosen the injector to check for fuel delivery.David

[tom.mcinerney]

David--
Are the glow plugs heating up?

To check for pressurized fuel output from FI pump, apply a 19mm(3/4") open end wrench to the 'line' or 'union' nut that holds the injection pipe to one of the injectors , and rotate CCW a bit. You should see fuel (and maybe bubbles) when cranking or idling. Sometimes the pressurized fuel sprays in eyes, etc. A rag around union will squelch flow....

[alberta]

Tom Thanks for your guidance.The glow plug light on dash comes on as usual.Low and behold the next day it started right up before I could test anything.Its running fine but I'm afraid it'l again.I'm thinking fuel is getting to the injectors,what else comes to mind that could cause turnover with no start? david

[rjwest]

Have someone turn ign on/off while you
Feel and listen to fuel shut off solenoid.

Should " Thunk" and feel the solenoid move.

If it doen't start again. at least ypu will be able to tell differance...