Removing vacuum pump

[JeepSJ]

I am in the process of removing the last vacuum controlled accessory on the Wag, so that means I can scrap the vacuum pump (one less thing to fail in the middle of the desert). My accessories are based on a '94 setup. Anyone know what belt I would need to run?

Thanks!

Mark

[john8662]

You need a belt off a 93 2500 series truck with the 6.5TD, they had a mechanical wastegate actuator and no vacuum pump, so the belt is shorter. Since your setup is based of the 94 you have similar brackets to the 92-95 setups!

[JeepSJ]

Thanks, John!

[autocrosser]

I'm not sure the 93 belt will work. The A/C compressor and alt is mounted differently an the A/c is a different sytle. Bill Heath gave me a number that he says should work on my 96 but I don't have it with me right now. I'll post it tomorrow.

[whatnot]

The '93 belt will work up till '95.
'96 and newer already use that belt with the vacuum pump and need a shorter one.
The part number for most brands end in 1010 for the '93 and end in 1020 for use with vacuum pump.
If you have a '96 or newer, you would need it to end in 1000 or maybe 0990 as some have posted about using.

[Mainous]

Just removed mine on my 97. It took a 100 inch belt.

[autocrosser]

The number Bill heath gave me for the 96 was 4061000 which I gess would be a 100" belt.