Turbo Master and max TQ Chip on 95TD

[GARY PAGE]

This weekend I installed a EGT and boost gauge. My truck run like a top; but like most owners of these things I like to make slow and steady improvements in performance and efficiency. My readings indicated a boost of about 5 PSI running on cruse at 2300 RPM and EGT about 420. When I push her unloaded she goes up to about 8PSI and EGT highest I saw under full throttle was a little under 600. I have air box mods, no cat and straight 3

[whatnot]

You can real easily raise the boost up to about 15 psi max and hold 12 psi.
All it takes is a potentiometer.
Kennedy diesel sells a ready to plug in one, or you can just splice a pot in much cheaper.(the schematic is in the 2000 feature articles on page 63)
The other thing, if you are going to get a chip anyway, they give higher boost without doing anything with the wastgate, so the turbomaster might not be necessary.

[GARY PAGE]

Thanks I figured that could be done. I am now looking for the article and it's long gone. I asked Jim about it since I could not figure out how to get on the web page.

[whatnot]

I had to buy the reprint. It cost about $20 but was worth it.