View Full Version : Injection pulse width
rockhouse
11-14-2003, 20:42
I've got a 94 6.5 turbo with a heath chip & turbomaster. The truck just recently started giving a code 35 Injection pulse width error (response time short). The light comes on intermittently & sometimes goes out while driving. Could the chip cause this? Is my truck going to die?
thanks,
Joe
Phil Holmen
11-14-2003, 23:51
I had the same problem on my truck... turned out to be an air leak in the fuel system.. everytime the air pocket worked its way to the IP it seemed like it would set a code... until I replaced all rubber lines and the o-rings in the fuel filter housing...
markrinker
07-24-2004, 09:39
Rockhouse - pulled this thread from the 'archives'. I have same code 35 issue.
How did you resolve this issue?
Barry Nave
07-25-2004, 04:15
Seems like hear lately the sudject code 35 is hitting a few member with out being to figure it out. Most trucks seem to run with this code,myself I have not had to deal with this issue yet I'll print all thats being said and all that has be done tracking this down.
Seems like one fix will take care of the 35 where it wont work for others. :confused:
moondoggie
07-26-2004, 10:19
Good Day!
You might want to look at DTC 35 - Help! (http://forum.thedieselpage.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=004386#000000) (Click in colored text.)
Blessings!
Brian Johnson, #5044
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.