Installed New Heads and gaskets, and still trouble.....

[Petrella]

Hey people, yesterday i installed two new heads, along with all gaskets. Got my injectors checked, they were junk so i bought 8 new injectors. Anyway, got it all together last night, and went to fire it up and the engine sounds really bad. It sounds like one of the injectors is not working, so its got a bit of a miss. My injection pump was changed in march. I was wondering if anything has to be timed? what did i do wrong??

Anthony
-----------------------------------------------
1994 K2500 4x4 Suburban
6.5 Turbo Diesel
Pyro,Tranny,Oil,Diff temp Gauges, Boost Gauge
FSD Cooler from my GM dealer
Sweet sounding JK Exhaust
Heath Chip
Boost Controller
Crystal Projection headlights, Turn signals and reflectors.
Euro Tail Lights
Cowl Induction Hood
2" Lift
305/70R/16 BF Goodrich All Terrains
3.73 Limited Slip
American Eagle 16x10 chrome wheels, style 145
Alpine Stereo,DVD,Navigation System, and Alarm
Indigo Blue Metallic
Pics of my truck - http://www.picturetrail.com/gallery/view?username=anthony1982&x

[arveetek]

Check to make sure all the injection lines are in the correct location and order...I understand it's easy to get 7 and 8 crossed. Also make sure all the lines are tight and not leaking...it doesn't take much of a leak at an injector or at the pump to cause an injector to drop out and not squirt, causing a misfire.

Casey

[Kennedy]

What brand injectors? Crossed lines as mentioned above are easy to do.

[Petrella]

all is good now! had the line for injector #6 loose!! whoops......thanks for the help guys. Kennedy, i bought the injectors at a local diesel shop in my area called Rovan Diesel in mississauga ON. They are bosch injectors