PDA

View Full Version : Possible 6.5 project



ulhpilot
01-15-2017, 22:59
It is getting to the point where I don't know if my '92 truck will ever get fixed (front end frame damage) and the drive train (engine, trans, xfer case, axles) are in excellent condition.
I'm considering grafting the parts into an older truck (pre torsion bar IFS) or even a custom built Jeep hybrid type vehicle. Has anyone done a complete swap; drivetrain, electronics, etc into another vehicle successfully? By successfully, I mean street legal and able to pass state inspections.
THX
Mick

trbankii
01-16-2017, 05:15
Quite a few such conversions - just scroll through the conversions forum: http://www.thedieselpageforums.com/tdpforum/forumdisplay.php?f=58

What transmission?

ulhpilot
01-16-2017, 08:36
quite a few such conversions - just scroll through the conversions forum: http://www.thedieselpageforums.com/tdpforum/forumdisplay.php?f=58

what transmission?

4L80E auto.