PDA

View Full Version : No pull and cruisecontrol issue



Hoyo
06-29-2016, 09:36
Howdy

I bought a 1997 Winnebago based on the Chevy chassie a few weeks ago. It has the 6,5td engine.
When I drove the RV home, the cruisecontrol did not work and going uphill, it was hard getting the speed to more than 30mph.

The day after i got it home, I took it out and the cruisecontrol worked just fine and the pull going uphill was also just fine.

A few more trips over the past few weeks and everything has been normal until today.
Going back home from a trip, the pull and cruisecontrol was just fine to start with.
However, after about 1hr 30min of driving the cruisecontrol did not engage and the pull going uphill was back to 30mph.

Can anybody point me in the right direction?
Pmd/fsd or solenoid problems comes to mind.

svcattle
06-30-2016, 00:19
my cruise sometimes wouldn't work when the first pmd was going out I cleaned the connection on the harness and the cruise control worked good after that . But one day I went to clock in for work came back out truck was off wouldn't start put a new pmd in and been good ever since I have remote mounted pmd and I also have a spare in the jockey box brand new