6.5 Valve seals

[befland]

I'm in the process of putting together my heads and needed new valve seals. When looking online I ran across this video of a guy installing the valves in his heads. These are the same type my uncle uses on his race cars but I can't find a listing for them on any 6.5. However, this same type is used on the d-max. Does anyone know what seals are being used in this vid? Are the the d-max seals?:
https://www.youtube.com/watch?v=iu5c0sBlI58

Bill

[N9Phil]

Why not go to 65dieseldirect.com and ask them. It looks like they were the ones that made the video. That would be the place I would start with.

Phil

[befland]

It was the first place I went. If you go there it looks like a storefront for a lot of different vendors. There was not a contact id but I sent a note to the vendor that looked like they sold engine parts. No response.

[JohnnyDiablo]

The umbrella seals? They are only supposed to be on the exhaust but I put them on both intake and exhaust. Video also doesnt show the o-ring seals being put on the valves.

Im no expert at 6.5 diesel but my heads worked.