PDA

View Full Version : Aftermarket Crossover



TJ
11-03-2003, 21:15
One thing I never hear about is an aftermarket crossover pipe for the 6.5L. Those who do have them, did you notice much of a difference? I have a 4 inch BD on my 98 with stock crossover.

Thanks,
TJ

1998 General Engine Products powered 6.5L
1985 Banks/Propane 6.5L

Turbine Doc
11-04-2003, 06:30
TJ,

I think Summit has them, if they have them then Jegs probably does also, at the risk of being accused as a JK salesman as was intimated elsewhere, he does have them as well, that is where I got mine.

It is mandrel bent same dia. as stock,
but smoother bends no krinkle in the pipe, ceramic coated; benefit is better flow out the engine to the turbo; ceramic protects from elements and keeps heat energy for better turbo spool up.

Does it work, by seat of pant I could really not tell any difference, but following logic of bigger exhaust= more power, then less restrictive out of engine flow to turbo should = power gain, just don't know how much.

taznj63
11-09-2003, 15:33
Hey TK....
You can find a crossover pipe here and a whole lot more...

www.turbo-master.com (http://www.turbo-master.com)

Hope this helps...