Glow Plug Controller / Coolant leak

[nigeljones]

I have just had to replace the glow plug controller. When removing the left nut that retains the controller to the cyl head, the one that is closer to the center of the vehicle. The nut froze to the stud and wound it self out. When re-installing the stud there was coolant present in the stud hole. Is this normal :eek:

Looking for input

Nigel

[diesel65]

The coolant came from the block off plate, just put the stud back and retighten and you should be good to go.

[nigeljones]

Thanks William, I'm a little paranoid just of late. I have had a few problems which I'm working thru and don't need any new ones. The great thing about the site is the advice however, it exposes you to others plight.

Thanks again smile.gif