PDA

View Full Version : No oil pressure?



Raider674
12-31-2014, 14:37
I just bought a 1992 Chevy k2500 with 6.5 turbo. Rebuilt transfer but they never put the torque converter on. New starter that i Put on. Said to have new fuel injector. But I know it's got a leaky injector. The exhaust fell off almost right off the turbo. I started it after a lot of trying put its not reading any oil pressure and I think I hear a knocking. It's 2 degrees here so I knew it wouldn't like it. It's for 300000 miles on it don't know if ever rebuilt. Any ideas why no oil presure and what might cause a knock? Plus any info on 6.5 would be nice they good motors? Any normal problems for them? Thank you

a5150nut
01-01-2015, 18:07
Welcome to TDP

Have you got a mechanical oil pressure gage you can verify with?

At those temps it will rattle quite a bit till wormed up. Is there a block heater? Look for 110 volt cord in left nostril of bumper.

Lots of good info here if you just hang out a bit.