View Full Version : oil filter?
welshswampy
10-05-2013, 12:09
Can anyone tell me what oil filter I need? I have a 6.2 N/A in my boat, I don't know the exact age but was told it was early nineties
Before it went in the boat a friend sprayed it (and the oil filter) so I cant see any numbers on it, anyone know a fram part number
Thanks all
BTW it runs sweet, noisy, but sweet :)
If you have a few extra inches of clearance under the filter, Wix 51794/NAPA 1794 would be my choice because it lets you put in about an extra quart of oil. Baldwin B7 is another one.
ToddMeister
10-06-2013, 12:32
Ac pf1218
My 83 6.2 C-30 calls out a Fram TG5.
DmaxMaverick
10-06-2013, 18:07
.....All this assuming you have a standard "over the road" oil filter adapter. If it isn't standard equipment, or if it's remote, all bets are off.
Also, friends don't let friends use Fram.
.....All this assuming you have a standard "over the road" oil filter adapter. If it isn't standard equipment, or if it's remote, all bets are off.
Also, friends don't let friends use Fram.
True, and every remote adapter I've seen, except for the 4.3l V6, used Wix 51515 filters. It's definitely a possibility.
welshswampy
10-07-2013, 11:39
Got the old one off and could make out the numbers, its a Fram PH 13
Whats so bad about the Fram filters?
sctrailrider
10-07-2013, 13:06
They are known for not filtering very well.... I like the Baldwin's myself..
ToddMeister
10-07-2013, 13:29
http://www.oilfilter-crossreference.com/convert/Fram/PH13
Got the old one off and could make out the numbers, its a Fram PH 13
Whats so bad about the Fram filters?
That's the standard GM filter, it crosses to both Wix 51060 and 51061. IIRC the former is meant for vertical mounting and doesn't have an anti-drainback valve, the latter mounts horizontally and does have the valve. If you have room I'd definitely run 51794, an extra quart of oil never hurts a 6.2l.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.