6.2 ATS turbo

[Subzilla]

In the final engine swap stages and have a turbo that has some chewed compressor blades. So I'm thinking replacement if not total rebuild. The local turbo shop is asking for the part number of the turbo. I found one tag in between the inlet side and the exhaust side with a number. Gave that number to the shop guy and he said it's not the right number. There is a squared out place on the end side of the inlet beside the "Air Research" logo but no tag. Looks like there should be one.

Anyone have this system that could give me the number from this tag assuming there is a tag here and assuming ATS used the same Garrett T4 turbo on all the 6.2 systems?? Thanks!

[Yukon6.2]

Hi Subzilla
I have an ATS with chewed up blades as well.
I will see if it has the tag,probably tomorow befor i can get to it.
If it's the same,i'd love the part # for the blade.
Thomas

[Subzilla]

I found a picture on line. It shows a good size tag screwed on one of the housing bolts. Look at the picture with turbo setup sitting inside the house...

http://www.cardomain.com/ride/3184140/1987-chevrolet-c-k-pick-up/

Thanks for looking for the tag!!

[Yukon6.2]

Hi Subzilla
Found my ATS turbo today.
On the turbo it's self was T04 and AR.60
On the tag attached to one of the bolts was
Custom Part # V406262-96
SN 2212
Hope that helps some.
Thomas

[Subzilla]

Perfect! Thanks Thomas! I'll let you know what the turbo shop tells me.

[dixiepc]

Here's a picture of the tag that's on mine. I've not been able to get anywhere with anything on that tag.

2489