85-m1028
09-28-2012, 23:42
I'm working on trying to get some fuel from the injection pump on my project. I just bolted in the pump and left the intake manifold off with the glow plugs pulled to crank it over.
Got everything connected and cranked it over a few times and pulled some codes.
Does any one know what ( P165E ) code means??
This was one of three codes pulled. The other two were for not having the glow plug controller and intake sensors hooked up.
The engine is a 97 civilian H-1 with a 4l80e bolted up to it that I put in a 1975 gmc jimmy
project build thread http://coloradok5.com/forums/showthread.php?t=258543
in case you need more info.
Got everything connected and cranked it over a few times and pulled some codes.
Does any one know what ( P165E ) code means??
This was one of three codes pulled. The other two were for not having the glow plug controller and intake sensors hooked up.
The engine is a 97 civilian H-1 with a 4l80e bolted up to it that I put in a 1975 gmc jimmy
project build thread http://coloradok5.com/forums/showthread.php?t=258543
in case you need more info.