no start

[Greg Marshall]

I need some good info. I had a redcent head falure. Truck wa running fine just losing water. So i bite the bullett, order a set of replacement heads, do the install and now what no start. When I try to crank, I am not getting any gow plug light or heat on them. I have opened the injectors and am not getting any fuel there. I can hear the lift pump running but it never shuts off like it should. I also dont hear the fule shut off clicking like it did. Also I have an come and got buzzing for the area of the injector pump. I have checked both the fule filter and the water drain and have good stream of fuel at both. PLEASE HELP!!! :confused:

[BobND]

Check all your system grounds. There are grounds attached to the head/intake/block that may not have gotten bolted back on, or are broken.

Check your harness connectors at the back of the engine.