Cable Bracket

[dixiepc]

I'm looking for a cruise control cable bracket for a 6.2 in a Chevy GMT 400 truck. The bracket bolts to the throttle cable bracket on the IP. This type of cruise control is the type that has the module bolted to the firewall. Late 80's or early 90'. Here is a picture of the bracket that I need. Can anybody help.

Thanks


2071

[neo]

i would make one if you can't find one. I could not whne I built mine and used a remote cruise from my 89 grand wagoneer (had to fab linkage too) but it worked out well. Piece of flat steel, but it out, broke over will a little break, but a vice will do the trick and drilled and cut square hole and done. Works like magic. good luck!