PDA

View Full Version : 4L80E Tranny question



fastcat800
12-09-2011, 09:16
Tranny is in limp mode. Went to back up and it felt like it poped out of gear and now I only have second gear and no reverse. I had it go to limp mode once before about a year ago and I cleaned the grounds and the speed sensor and it has been fine ever since. I can't remember if reverse worked last time it was in limp mode. I changed the tranny filter a couple of weeks ago and it has worked flawlessly until today. Could it be an electrical problem again or did the tranny go out?

JohnC
12-09-2011, 09:18
Reverse is mechanical. If it doesn't work, it's a mechanical failure.

Check the codes...