Front brake rotor replacement on 06, 3500, 4X4

[CoyleJR]

I guess that I should not complain about needing new front rotors at 170K miles. But it is 100 degrees outside and the truck won't fit in the garage. The truck is a DRW, 4X4 and I am wondering if there will be any surprises pulling the rotors. I believe that the hub extension for the DRW should unbolt from the rotor studs and if I remove the caliber and caliber bracket the rotor should pull off. If I am mistaken about the rotor replacement process I would appreciate any advice on this job.

Thanks John

[More Power]

Expect some rust gluing things together. Otherwise, you've got it down. Spray some WD on the parts at least 24 hours before beginning. It might take a BFH to get the rotors off. ;)

Jim