PDA

View Full Version : Brake light and rear turn signals do not work



JADennis
06-09-2011, 08:11
I have a 2000 K3500 with brake light and blinker issues. The brake lights did not work, but the 3rd brake light did. The turn signals worked. The hazards worked. I replaced the relay under the hood and the flasher relay. Same problem. I took off the blinker switch assembly and found 3 places where the plastic had melted on the gray connector (large white wire, smaller light blue, smaller light brown). I replaced the turn signal switch. Now I do not have brake lights OR turn signals. Third brake light and hazards still work. Any suggestions other than a flare in the fuel tank (my wife NO to that idea).

JADennis
06-09-2011, 14:01
I do not know what I did, but my blinkers are back. Still no brake lights except 3rd one.

JADennis
06-10-2011, 09:04
Just finished replacing the stop light switch on the brake pedal. The brake still do not work but the blinkers, hazards, and 3rd brake light do work. Any suggestions?