Trouble Code?

[scot5146]

Trouble Code?
Hey everyone-

My suburban project gave the service engine soon light yesterday...

I ran my OBD II scanner and got a code: P0251

(Injection Metering Control A- (cam/rotor/injector)

can anyone shead some light on this for me, I am confused and not sure what this means or what I need to repair...

thanks

Mike

[Kennedy]

I would clear it and see if it comes back. If it does and you are not running red fuel, I'd say you are looking at a new pump.

[DaveBr]

If you are using an additive in your fuel it could be the problem. I had this happen to me. I changed to a different additive and that was the end of the problem. If this is not the problem then it's time for a new I.P.

[scot5146]

If you are using an additive in your fuel it could be the problem. I had this happen to me. I changed to a different additive and that was the end of the problem. If this is not the problem then it's time for a new I.P.

Hey guys

Thats the answer I was looking for, thanks again

Mike;)