Rear axle alignment

[suburbanK-2500HD]

Anyone been adjusting the toe in on the rear axle.
My left side is +0,4 min, the right side is -11min.
I have the full float axle..
i tryed to pry it, but it only moves a litle bit (0,3min) because of the sentering pin in the leafspring that is resting against the axle i a hole.

[DmaxMaverick]

There is no "toe-in" on the rear truck axles (except the 4 wheel steering models). If it's off, hanger pins/bushings are worn out, the frame is bent, spring arc is different between L/R sides, hangers are bent/loose, or axle housing is defective/damaged. The axle housing and wheels should be square and true with the frame.