Boost pressure

[suburbanK-2500HD]

Noticed something weird today.

After i disconnected the vacum lines, and connected them i got higher boost pressure.
Could this be because i have swapped the line to the boost sensor.

Before this i had about 0.6 Bar max, now i have 0.9 Bar. No ses light ore anything...

[DmaxMaverick]

You probably have them reversed, or otherwise installed incorrectly or fouled a line at some point. No SES because you probably didn't exceed any limits, with it "bypassed", or the limits weren't exceeded long/often enough. You will at some point in the future, if you don't correct it. Limp mode is NO fun.

[suburbanK-2500HD]

Well, i am going to install the air\air cooler wery soon so i guess the extra boost wont do anything wrong.

i i get any trouble i can connect to the ECM with diagnostic to clear any problems.

here is a pic of the hood, will get it painted next week...