View Full Version : Stock lift- gpm and psi
Anyone know what the gmp/gph and psi specs are for the stock lift pump?
Also, the max psi you would want to send to the IP?
Thanks
The DS4 IP has an internal transfer pump that sets the internal pressure. It has a pressure relief valve on the inlet that limits the pressure coming in. Unlike the DB2 pumps, any pressure greater than zero is fine. There is a volume spec, but I'm not sure I recall it correctly. It may be a quart in 30 seconds. That should be enough; it works out to about 4 mpg at 120 mph...
6.5TDTahoe
07-24-2010, 09:43
Obtain & install stock 1993/3500 series ACDelco lift pump. Best lo buck solution! Direct to stock fuel line & electrcial plug installation.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.