Electical Connectors

[Truckie117]

HI I am looking for the electrical connectors for the injector pump where are they available?I posted a picture of the connector the locking tab broke off.

[DmaxMaverick]

Connectors are available (dealer, LMC Truck, etc.). However, if it is otherwise in good condition, use a wire tie (zip tie) to keep it secure. Easy (and cheap) to do. It doesn't have to be tight, just snug enough to keep it from working loose (and makes later removal easier).

[Robyn]

X2
Been there done that.

The little zip ties work really well to keep these in place.


Missy

[Truckie117]

Ok Great that was a second choice I found them on acdelco site 38 bucks crazy!
part numbers
PT246 or 12101854

[Truckie117]

Anyone have a picture of how the timing adj wrench goes on the inj pump and from what side I am thinking about making my own wrench but would like to know from what side the wrench gets attached to the pump
Thanks

[DmaxMaverick]

Wrench? Your timing is electronic.

Otherwise, the only "wrench" needed is to secure the pump and adjust the initial timing range. These are the three located on the pump flange, rearward.

[Truckie117]

This wrench to adj the timing

[LanduytG]

HI I am looking for the electrical connectors for the injector pump where are they available?I posted a picture of the connector the locking tab broke off.


These connectors are nothing special, standard Delphi Metri Pak 150. We have the connector, terminals, seals and retainer for $8.

GREG