Tranny lines

[engineeradam]

I was gonna replace my tranny lines, with hydraulic rubber lines and was wondering:
1.will it work?
2.should I use 2wire or 1wire line?

[john8662]

Re-inforced would be good.

Do some searchin on the net, there is a place that I seem to remember makes replacement transmission lines, has the 6.2L listed in some chassis.

The steel lines are preferred.

I'm thinking of doing the smaller 5/16" steel braided lines from my trans cooler to the transmisison on one of the trucks. This isn't real cheap though, will run at or less than $150 to do.