fan switch

[deerhunter7]

Does any one know the part number for a fan switch. My high speed only works if you stop between 4 & 5 positions . 2 years ago fan and resistors were replaced..

[DmaxMaverick]

No fan switch. You'll have to replace the HVAC control head (very easy to do). I may have one. There were 2 options in 2002, maybe 3 with the CC. Take a pic of the control panel and post it here, or send it to my email (link in signature). The dealer gets $150-180 for them, depending on the options. The one I have was swapped out at about 5K miles, works, and is like new.

[EdHale]

I had to replace this switch twice in my '98 Suburban over 245,000 miles. It seems GM is still using too small gauge wires and other components is their switches. I wish they would belly up and increase the size of these things so they don't over heat and fail over time.

Oh well.

Ed

[deerhunter7]

Took apart the fan switch to see what went wrong.. Plastic shaft was worn where the plate contacts slide over it.. Contacts end up stopping before or after on speeds 2 and 5 ..Was nothing to do with wiring.. but still have to replace..

[cowboywildbill]

I think I have one still in the box. I took it out of our 2002 GMC when it was new, I replaced it with the another Control Head switch that has the extra button for the heated mirrors when I added a set of after market mirrors. If he doesn't have the one you need then Let me know.
Just drop me a PM.

[deerhunter7]

Recieved control box from cowboywildbill ,installed it,took about 5 minutes. and good to go..

[cowboywildbill]

Glad I could help. Take care.