Thanks Engh!

[Wing Nut OOA]

program works great. love it.


so here's my findings.


any input?



http://img12.imageshack.us/img12/6088/truck2.png


http://img12.imageshack.us/img12/1332/truck1.png


http://img12.imageshack.us/img12/306/truck3v.png



this last picture is just to show that i got the top dead center offset on the far right to read 2.02 at one point. i believe it was by hitting the learn button and restarting the truck.


really not sure what i'm doing anyway. but the code 62 is i think the problem i had been having on and off.


the other two 56 and 88 only popped up after i plugged the computer in and started messing with things.

tried clearing them to no avail.

[suburbanK-2500HD]

Hi

take a look at theese docs

tdc offset error is because the the tdc is out of range

[1629dill]

What program are you using?

[suburbanK-2500HD]

I use the GMTD Scan Tech from Enghs motor

You got have a OBD 1 truck to use it.