Injection Pump

[3dubs]

I have searched the threads but could not find anything but a reference to the Member's Area. I tried to read in the Member's Area but it would not allow me to read anything.

I have a 6.2L J in a M1009. I was trying to find what injector pump was in it. I was also told the DB2-9411 from a 6.5L would work.

It is in an 85 with only 15,000 miles. I was told the IP would go bad sitting for so many years.

[Robyn]

First off.

Welcome to TDP :)

The injection pump should not go bad sitting unless its had water in the fuel.

You can view the tag on the IP in your truck, the number will be on that tag.
The Mil trucks used a lot of different stuff.
Many were designed for 24Volt systems so be sure what you have before swapping stuff around.

The 4911 pump from a 6.5 will work fine. This pump is set to fuel a turbo 6.5 though and will fuel a NA 6.2 a bit much (more smoke) (Just be sure of the trucks voltage to the IP first)

The reason you can't access the members area is that this is a fee based area.

For paying members all the technical materials are then available along with new articles every month.

If you have paid membership and still can't access the area contact "More Power" or "DMax Maverick" These are the administrators of TDP and will be able to help.

Best

Robyn