How do I get to fsd wire connection?!?

[Keith Richards]

Is it humanly possible to get to this without taking off half of the engine?I cant see down there or get my hands in there or anything.I just received my Kennedy remote mounting fsd package and it says to just take off the connection with a screwdriver.He says nothing about removing ant parts,how have you guys done this?

[Keith Richards]

Uh,I got it fixed.Very hard to get in there,but,praise the lord,no more stalling for a while!

[Aryeh Levy]

For all who're new - I learned this from a post a while ago.

You use a flashlight, a long screw driver and patience. it's between the first and second intake runner driver side, from the front.

[autocrosser]

I keep a long flat blade screw driver and a pair of long needle nose pliers in the truck to fish it out, along with my spare that's mounted on a home made heat sink.

[JeffsTowTruck]

I did mine the same way.. Long (12" to 14") flat screw driver on the left side 1st or 2nd intake hole. You need to pry up the catch on the plug or the lock arm(whatever you call it). Then use the same screw driver to install the new one.
It's not really that bad. ;)
Glad you got it.
The good part you saved yourself several hundred dollars.