Serpintine belt conversion

[300stw]

i am looking at a belt conversion off of a 93 6.5. the gentlemen said i would need a new waterpump and engine cover to install on my 85 model 6.2. http://www.dieselplace.com/forum/showthread.php?t=304756 this link is the stuff i am interested in buying if i can figure oout what else i need..

[Robyn]

The 93 serp stuff will work dandy on your old 6.2
You must use a 6.5 water pump (serp drives turns the pump the opposite direction.
You will also need the back plate from the 6.5 water pump that is also the timing cover front plate.

The one from the 6.2 has a different bolt pattern where the pump bolts on.

You need the fan and clutch from the 6.5 as it too must rotate correctly.

The stuff will bolt right on as there is no physical difference between the 6.2 and 6.5 on the outside in this area.

I have a 93 serp setup going on a 6.2 so I have been through all this stuff already

Have fun

Robyn