Locomoko
04-14-2009, 19:37
OK here is one for the forum...
Recently rebuilt my Burbs 4L80e transmission, with standard clutch packs & steels, o-rings, etc. using a video and ASTG guide. The build went well without snags... the instructions were good and the video had good tips. The re-assembly also went along according to the instructions with the key progress checks passing, so I think the build was successful. However, there is a problem that the forum could possibly steer me as to where to look for a solution. :D
The engine starts in Park and Neutral as it should. The shift lever won't go to 1st and there is no reverse (with shift lever in reverse). Also when started in Neutral it is immediately engaged in a forward gear (with shift lever in Neutral).
The shift cable adjustment was done (unlock the white clip, move ten times, then re-lock) but that didn't change my shifting problem. :(
I thought I had this thing licked, now I need help please, anyone experienced? and thanks for reading the post. :confused:
Recently rebuilt my Burbs 4L80e transmission, with standard clutch packs & steels, o-rings, etc. using a video and ASTG guide. The build went well without snags... the instructions were good and the video had good tips. The re-assembly also went along according to the instructions with the key progress checks passing, so I think the build was successful. However, there is a problem that the forum could possibly steer me as to where to look for a solution. :D
The engine starts in Park and Neutral as it should. The shift lever won't go to 1st and there is no reverse (with shift lever in reverse). Also when started in Neutral it is immediately engaged in a forward gear (with shift lever in Neutral).
The shift cable adjustment was done (unlock the white clip, move ten times, then re-lock) but that didn't change my shifting problem. :(
I thought I had this thing licked, now I need help please, anyone experienced? and thanks for reading the post. :confused: