View Full Version : High flow water pump
Subzilla
01-06-2009, 09:48
Way back when, I installed a high flow water pump on the Suburban. My K5 is weeping a little and I'm thinking of installing the same on it BUT I do not remember where I got this thing. I know some vendor on the DP offered it, it seems, for our 6.2's but I searched and did not see one. Anyone know where and if I can get a high flow water pump?
DmaxMaverick
01-06-2009, 10:18
www.peninsularengine.com is most likely, especially if it's been a few years.
Kennedy may have offered the high flow for V-belts, but I'm not sure. There were no others, that I'm aware of.
Subzilla
01-06-2009, 11:14
Yup, you're right. I e-mailed Peninsular and they still sell it for $85 plus shipping. Hmmm. Advance Auto has new ones for $60 and rebuilt ones for $30. Decisions....decisions...
Didn't see one on Kennedy's site. I might e-mail him, too.
Thanks!
More Power
01-06-2009, 14:36
As I recall, the hi-flow Peninsular V-belt water pump was rated for something like 100-gpm, where the factory 6.2 WP was rated at 70.
Jim
I'm using Flow Kooler water pump (IIRC), Robert Shaw 180* Thermostat, 4 core radiator, Royal Purple Purple Ice....
Only problem is winter time, My truck runs alittle on the cool side,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.