Best way to bar-over 1994 6.5TD

[ol9465er]

I am removing my IP and need to access the bolts on the gear through the oil filler hole. What is the best way to bar-over the engine to no damage the torsional damper. Should I remove the damper? Should I remove the glow plugs? Other?

Any help appreciated.

[DmaxMaverick]

No biggie. Remove as many glow plugs as you can reach. This makes turning much easier, as you don't have to fight (as much) compression. Then, use a socket on the balancer (damper) bolt. You won't loosen or damage it. Turn it only clockwise, if it concerns you.

[ol9465er]

DMaxMaverick

Thanks, worked like a charm...

Getting the new pump tomorrow and will install.

[rhsub]

A socket and 1/2" rachet on the alternator pulley nut works great, I have changed many pumps this way :)
Ron