NA injectors on a turbo engine?

[Chief919]

I have a set of near new 6.5 NA injectors, and need a set for my turbo engine. How much difference is there between the two types, and will I see any problems running them?

[More Power]

If the NA injectors were made for an electronic DS-4 equipped 6.5, they should work. If the injectors were originally installed in a mechanically injected 6.5, they may work. I know there are those who have retained their original injectors installed in their electronic engine when converting to mechanical fuel injection. They didn't report any problems.

For best results, I'd want to use matched components, but I'd probably do what you're proposing..... ;)

Jim

[Chief919]

Yep, they are from a DB2 pump. I am going to give it a try and see what happens.

[john8662]

They should work just fine, they're for a 170HP N/A 6.5, there were even a few DS4 Non-Turbo engines produced (would love one actually),

Try em.

The only thing you might suffer would be a little less power, but I'll bet you won't even notice.

J