Kennedy Extensions & New PMD

[mzllo dr]

Where can I get a new PMD, heat sink, and extension wire harness to relocate new PMD away from IP ?? Where should I put the new PMD ??

[oldmansax]

I got mine from John Kennedy. Good products. His web site is here: Kennedy Deisel (http://www.kennedydiesel.com/)

[David Brady]

mzllo,
I installed my FSD behind the drivers headlight. I had to drill a little but the harness I received from Kennedy worked fine and the FSD cured my surging and slowing problem.

[charliepeterson]

Where ever you decide to mount the cooler make sure the hold down screws stay tight! If the driver doesn't have good contact it will fail. I use Blue Loctight on the screws. I've had mine on top of the intake for almost six years and only lost one driver. The screws loosened up and the loctight went on.